PP Pleated and glass fiber cartridges are designed for higher filtration area & high throughput. It has a 6 inch/152mm large diameter and is a coreless, single open-ended structure with an inside to outside flow pattern. Due to its large diameter with a big filter area, it requires lesser elements for a given flow rate than standard cartridges diameter, due to lesser elements Filter vessels’ size workout smaller, resulting in lower capital investment and installation costs, as well as reduced operating costs.
|valve||1.5” Filter and Softener Top Mount||1.5” filter and Softener Side Mount|
|Media||Fuel, Water||Fuel, Water|
|Valve connection with top opening vessel||65 mm (2 ½”) NPSM (8 tpi) or 100mm (4”)||–|
|Riser pipe size||32 mm PVC pipe||–|
|Max. flow rate (valve + strainers)||12 m3/h||12 m3/h|
|Working Pressure||0.15 – 0.6 MPa||0.15 – 0.6 MPa|
|Working Temperature||5 – 50 ˚C||5 – 50 ˚C|
|Inlet, outlet, drain connections||40 mm BSPF quick release union straight||40mm BSPF quick release union straight|
|Maximum Operating Pressure||4 to 6 Kg/cm2 for GF||4 to 6 Kg/cm2 for GF|
|Minimum pressure for uniform suction||2.0 kg/cm2||2.0 kg/cm2|
|Ejector brine line||½”BSP||½” BSP|
Note: Riser pipe length with bottom strainer attached should be 40 mm above vessel top.